You searched for makita
Makita HP457DWE10 Combi drill accessories with carry case- (2X) Battery 18 V 1.3 Ah Li-Ion Bl1813G
- Charger Dc 18 W
- It Includes 74 piece accessory set for drilling and fixing
- Includes carry case
- Noise sound pressure : 81 deciBel(A) , Noise sound power : 92 deciBel(A) ), Noise K factor : 3 deciBel(A)
- 13mm keyless chuck
- Rotary, rotary hammer & screwdriver modes
- 16 torque settings in screwdriver mode
- 2 speed gearbox with all metal gears
- Variable speed trigger for perfect control when screw driving
- Electric brake, two mechanical gears
- Variable speed control trigger forward/reverse rotation
- Twin LED job light, ergonomic soft grip
- 22 minute charge time
- Keyless chuck, compact and lightweight design
- Equipped with battery protection circuit: Designed to protect the battery from damages due to over discharge, high temperature or overload current
- Useful kit for most drilling applications
- Use with power drill for drilling wood, steel and masonry
- Also includes wood cutting holesaws
- Accessory set designed for use with drill drivers, combi drills and impact drivers.
- Includes a tic tac container which can be removed form the case and carried in a pocket for added convenience.
- Each items position is labelled for easy selection and organisation.
- Accessory set designed for use with drill drivers, combi drills and impact drivers.
- Includes a tic tac container which can be removed form the case and carried in a pocket for added convenience.
- Each items position is labelled for easy selection and organisation.
- DHP458 Combi Drill: Enhanced dust and drip-proof performance for use in outdoor applications or harsh environments.
- DGA452 Angle Grinder: 4 pole motor.
- DJR181 Recip Saw: Tool-less blade change.
- DSS610: Circular Saw: Double safety trigger.
- DTD146: Impact Driver: Compact design with a short overall length of 138mm
- DHP458 combi drill: Compact design, only 225 mm overall length
- DTD146 impact driver: Weights only 1.3 kg
- DSS611 circular saw: Rigid aluminium base
- DKP180 planer: Planes a width of 82 mm
- DJV180 Jigsaw: Three orbital settings and straight cut
- DGA452Z 18V Li-ion LXT 115mm Angle Grinder
- DHP458Z 18V Li-ion LXT Combi Drill
- DJR186Z 18V Li-ion LXT Reciprocating Saw
- DSS610Z 18V Li-ion LXT 165mm Circular Saw
- DTD152Z 18V Li-ion LXT Impact Driver
- 3 x 5. 0 Ah li-ion LXT batteries
- 1 x twin port charger
- 1 year manufacturer warranty with a further 2 years when registered within 30 days of purchase. This guarantee does not apply where non-genuine or recommended parts or accessories are fitted to the tool(s). The use of non-genuine or compatible batteries and chargers with Makita tools will invalidate the Makita guarantee for our tools.
- Twin charger with USB port providing 1.5A output for charging Smart phones, tablets, etc.
- 5.0 Ah li-ion batteries to deliver 430 per cent more working capacity during its lifetime
- LED job lights
- Carry bag stores and protects tools
- 0-30000 impacts per minute (Hi) 0-7500 impacts per minute (Lo)
- 21 plus drill torque settings
- Electric brake, two mechanical gears
- Variable speed control by trigger, forward/reverse rotation
- Compact overall length of 182 mm, keyless chuck
- Aluminium gear housing, all metal gear construction
- DHP481 18v Brushless Cordless Combi Drill features Brushless BLDC motor specially designed to provide, above all, more work amount on a single full battery charge
- Forward/reverse rotation
- DTD154 18v Brushless Cordless Impact Driver features extreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
- 3 stage impact power selection + TEK mode prevents over tightening of fasteners
- DHP458Z enhanced dust and drip-proof performance for use in outdoor applications or harsh environment
- Single sleeve keyless chuck allows for easy bit installation/removal by one hand
- Twin LED Job light with pre-glow and afterglow functions
- DTD152Z; electric brake, variable speed control by trigger, forward/reverse rotation
- Twin LED job light, ergonomic soft grip, compact and lightweight design
- High rotation speed, one-touch bit installation. Battery fuel gauge The power remaining in the battery can be indicated in 3 stages simply by pushing a button; 3 lights on: more than 50% of full battery capacity. 2 lights on: 20% to 50% of full battery capacity. 1 light on: less than 20% of full battery capacity
- Forward/reverse rotation
- Single sleeve keyless chuck allows for easy bit installation/removal by one hand
- Two mechanical gears
- Electric brake
- Variable speed control by trigger
- Best possible ergonomic handle for drill-driver applications
- Maximum in wood 36 mm; maximum in masonry and steel is 13 mm
- No load speed 1300-400 RPM
- Maximum torque 42 Nm
- Two metal mechanical gears
- Blows per minute high: 0-19500 BPM low: 0-6000 BPM
- Two mechanical gears
- 22 minute charge time with the air cooled Makstar Optimum Charging System.
- Conveniently located push button for forward and reverse.
- High comfort grips.
- Two speed gear box.
- Metal gears
- Combi Drill with an overall length of only 198mm
- Although small it is packed with features like 21 different torque settings
- 3. 0 Ah battery
- Electric brake
- Two mechanical gears
- Variable speed control trigger
- Forward/reverse rotation
- Twin LED job light and keyless chuck
- Equipped with battery protection circuit: Designed to protect the battery from damages due to over discharge, high temperature or overload current
- Electric brake
- 2 mechanical gears.
- Variable speed control by trigger
- Maximum in wood 65 mm, maximum in masonry 16 mm maximum in steel 13 mm
- No load speed 0-2000/400 RPM
- 0-3000/6000 blows per minute
- Enhanced dust and drip-proof performance for use in outdoor applications or harsh environments
- Single sleeve keyless chuck allows for easy bit installation/removal by one hand
- Twin LED Job light with pre-glow and afterglow functions
- Compact design with an overall length of only 192 mm
- Single sleeve keyless chuck allows for easy bit installation/removal by one hand
- Rubberised anti-slip ergonomic handle for comfort
- LED Job light with pre-glow function - illuminate the job in poor lighting conditions
- Brushless motor specially designed to provide more work amount on a single full battery charge
- Compact design with an overall length of only 192mm.
- Single sleeve keyless chuck allows for easy bit installation/removal by one hand.
- LED Job light with pre-glow function.
- Height 325mm
- Width 175mm
- Length 315mm
- Rigid aluminium base levels 0 to 45 degrees left and right
- Variable speed control trigger
- Connectable to dust extractor
- This item only works with G-Series batteries
- 0-4000 blows per minute
- No load speed; 0-1100 RPS. Noise sound power is 98 dBA
- Maximum in concrete 20 mm; maximum in steel 13 mm; maximum in wood 26 mm
- Conveniently located push button for forward and reverse
- Triple operation mode: Rotary only, hammer only and rotary hammer
- One-touch sliding chuck for easy bit changes