You searched for makita dhp484z 18v li-ion brushless combi drill 54
Makita DHP484Z 18V Li-ion Brushless Combi Drill 54 Nm - Body Only- 0-30000 impacts per minute (Hi) 0-7500 impacts per minute (Lo)
- 21 plus drill torque settings
- Electric brake, two mechanical gears
- Variable speed control by trigger, forward/reverse rotation
- Compact overall length of 182 mm, keyless chuck
- Aluminium gear housing, all metal gear construction
- Compact overall length of 185mm
- 1.4 times the work amount of BHP456 on a single battery charge because of no friction loss caused by brushes
- XPT (eXtreme Protection Technology) - Enhanced dust and drip-proof design to ensure reliable operation even under bad weather
- Rubberized soft grip provides comfortable and sure grip
- Variable speed control by trigger
- 1 x Makita DHP483Z Combi Drill
- MAKPAC Type 3 Connector Case.
- DHP459Z - 18v LXT Combi Drill.
- DTD129Z - 18v Impact Driver.
- 2 x BL1840 18v 4.0ah Batteries.
- DC18RC - Compact Charger.
- 0-30000 impacts per minute (Hi) 0-7500 impacts per minute (Lo)
- 21 plus drill torque settings, Electric brake, two mechanical gears
- Variable speed control by trigger, forward/reverse rotation
- Compact overall length of 182 mm, keyless chuck
- Includes Makpac Case with Inlay
- Brushless motor
- One touch sliding chuck
- 2 mode operation; rotary only and rotary hammer
- Led job light
- Vibration absorbing housing
- Capacity in concrete 17mm, steel 10mm and wood 13mm
- 1 year manufacturer warranty with a further 2 years when registered within 30 days of purchase. This guarantee does not apply where non-genuine or recommended parts or accessories are fitted to the tool. The use of non-genuine or compatible batteries and chargers with Makita Tools will invalidate the Makita guarantee for our tools.
- Maximum fastening torque 170 Nm.Overall length is 1.26cm
- No load speed 0-2400 RPM
- Brushless motor
- One touch sliding chuck for easy bit installation and removal
- Forward/reverse rotation
- Variable speed control by trigger
- 18V Impact Driver: This durable power tool is compatible with all Makita 18V lithium-ion batteries such as BL1850, BL1850B, BL1860B, BL1840, BL1830 etc.(Not Included)
- Efficient BL Brushless Motor: The BL motor eliminates carbon brushes, enabling this driver to run cooler and more efficiently, optimize battery energy use for up to 50% longer run time per charge
- 4-Speed: You can select 4 working speeds by switching the Left button, to provide you with precise fastening control according to your need. With variable speed (0-2700 RPM & 0-3500 IPM Max) delivers up to 3097 in.lbs of max torque
- 2-Mode: After turning on the Right button, it will stop working automatically which helps eliminate "screw cam-out" and "cross threading" by driving at low speed until tightening begins. While if you turn off it, it will work continuously for faster tightening of Self-Drilling screws helps prevent damage to the screw or workpiece
- Reversible Button: The red rhombus button enables you to control the working directions to be clockwise or anticlockwise which helps you fasten or loosen the screws easily. When you don't need to use this tool, you can switch it to middle, then it won't work even though you press the trigger. This will ensure that the battery doesn’t drain if the trigger is pressed inadvertently, for instance, in a toolbag or toolbox
- Jigsaw 18V Cordless Brushless Li-ion (Body Only)
- Brushless motor - less friction
- Bevel cutting - Aluminium base can be tilted up to 45 Degrees left or right
- Rigid aluminium base bevels 0 to 45 degrees left and right
- Change lever for 3 orbital settings and straight cutting
- 1 x 4.0Ah battery BL1840
- 1 x DC18RC Charger
- Captive bar nuts for solid bar retention
- Variable speed trigger
- 18Vx2 Brushless motor provides chain Speed of 1,200m/min
- Adjustable chain oiling
- Metal spike and kickback brake provide additional safety and control
- Bevel cuts up to 50º
- Automatic speed control
- Electric brake
- Electronic current limiter for overload protection
- Led indicator panel with 3 LED's has 3 Functions. 1 - monitor battery power remaining, 2 - indication of automatic speed control, 3 - indication of overload protection activation
- 1 x Body Only Tool DTD154Z
- Brushless motor
- T-mode: Tightening mode for self-drilling screw
- One touch sliding chuck for easy bit installation and removal
- 1 x DTD154Z cordless brushless impact driver
- 2 x 5.0Ah BL1850 batteries
- Brushless motor
- One touch sliding chuck for easy bit installation and removal.
- LED job light
- Ergonomic soft grip
- Electric brake
- Makpac Case Type 3
- 2 Batteries 18V 5.0Ah Batteries Bl1840
- Charger Dc18Rc
- Impact Wrench
- ***Limited Edition White & Black Model***
- Brushless technology
- Max. in masonry: 13 mm
- Blows per Minute: 0-22500/6000 bpm
- Net weight: 1.7 kg
- Maximum in wood 36 mm; maximum in masonry and steel is 13 mm
- No load speed 1300-400 RPM
- Maximum torque 42 Nm
- Two metal mechanical gears
- Blows per minute high: 0-19500 BPM low: 0-6000 BPM
- Two mechanical gears
- 22 minute charge time with the air cooled Makstar Optimum Charging System.
- Conveniently located push button for forward and reverse.
- High comfort grips.
- Two speed gear box.
- Metal gears
- Combi Drill with an overall length of only 198mm
- Although small it is packed with features like 21 different torque settings
- 3. 0 Ah battery
- MAKITA 18V COMPLETE COMBI DRILL X2 LITHIUM BATTERYS , CHARGER. CARRYING CASE
- XR LI-ion
- COMPLETE WITH 100 MIXED DRILL ACCESSORIES IN CASE
